Which eigrp information is held in ram

RIPv1 D. EIGRP is an "advanced" distance-vector routing protocol, sometimes called a hybrid routing protocol because it uses the characteristics of both distance-vector and link-state routing protocols. If routers in a single area are configured with the same priority value, what value does a router use for the OSPF Router ID in the absence of a loopback interface?

The lowest IP address of any physical interface B. The highest IP address of any physical interface C. The lowest IP address of any logical interface D. If you have a loopback interface configured logical interface , then that will override the interface IP address and become the RID of the router automatically.

Which of the following are true regarding OSPF areas? You must have separate loopback interfaces configured in each area. The numbers you can assign an area go up to 65, The backbone area is also called area 0.

If your design is hierarchical, then you don't need multiple areas. All areas must connect to area 0. Correct Answer: 3, 4 and 5 Explanation: Loopback interfaces are created on a router, and the highest IP address on a loopback logical interface becomes the RID of the router but has nothing to do with areas and is optional, so 1 is wrong.

The numbers you can create an area with are from 0 to 4,,, option 2 is wrong. Which of the following property defines the style of quotation marks to be used with embedded quotations? Nils Nilsson headed a team at SRI that created a mobile robot named:. Which approach to speech recognition avoids the problem caused by the variation in speech patterns among different speakers?

Enviornmental Science. International Organisations. Famous Personalities. Sentence Improvement. Reading Comprehension. Asked on by Guest Votes 0 Views: 8 Tags: computer science computer networking eigrp and ospf Add Bounty. In the routing table only B. In the neighbor table only C.

In the topology table only D. In the routing table and the topology table E. In the routing table and the neighbor table Answer: Option D Explanation: Successor routes are going to be in the routing table since they are the best path to a remote network. However, the topology table has a link to each and every network, so the best answer is topology table and routing table.

Any secondary route to a remote network is considered a feasible successor, and those routes are only found in the topology table and used as backup routes in case of primary route failure. Report errors. You can see the topology table with the show ip eigrp topology command. The topology table contains any route that is not as good as the successor route and is considered a feasible successor, or backup route.

Remember that all routes are in the topology table, even successor routes.